메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Matt West- 에 의해 수정

편집 승인됨 에 의해 Matt West

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use a pair of tweezers lift the latch ribbon cable connecting the GPS antenna to the central Printed Circuit Board (PCB): use the tweezers to lift the tan latch(marked by red box) off the ribbon cable and gently pull out the ribbon cable from underneath the opened latch.
[* black] Use a pair of tweezers lift the latch ribbon cable connecting the GPS antenna to the central Printed Circuit Board (PCB): use the tweezers to lift the tan latch(marked by red box) off the ribbon cable and gently pull out the ribbon cable from underneath the opened latch.