E-bike Disassembly of frame for painting (model: HNF UD1) 단계 #33 기록

#33단계의 변경 사항

편집자 Bango Bejla- 2021년 7월 21일

편집 승인됨 완료자 Bango Bejla

	[title] Remove Nuvinci shift cables
	[* black] shift to a position that allows easy access to the shift cable hardware
-	[* black] Remove the shift cable hardware
+	[* black] Remove the shift cable hardware ends
	[* icon_note] First the lower one with closing mechanism (open and lift)
	[* icon_note] Then the upper one
	[* black] Remove the three screws holding the cable holder with a 3mm hex key
+	[* icon_reminder] The NuVinci gear shifter is on the right side. The cabels are tied together with the supernova lamps smaller cabel and go down on the left side of the frame. Then cross under the black part below the battery and exit on the right side. Then it goes down to the inner part of the frames back triangle and has three holders.
+	[* icon_reminder] The kabel with no closing mechanism comes on the top part, and the closing mechanism from the bottom and closes in on the top