#23단계의 변경 사항
편집자 Bango Bejla-
편집 승인됨 완료자 Bango Bejla
- 이전
- 이후
- 변경 사항 없음
단계 라인
- | [title] Remove the black cable hider |
---|---|
[* black] Remove the upper screw with a 3 mm hex key on both sides. (2x in total) | |
[* icon_note] These screws are slightly longer and thinner, than the lowest screws | |
[* black] Remove the screw next to the battery charging port with a PH1 Screwdriver | |
[* icon_note] This screw is the smallest of the three types | |
[* black] Remove the lower screw on one side. | |
[* icon_note] This lower screw is thicker and shorter, than the upper hex screw | |
[* icon_note] The screw on the other side can also be removed, however, there must be a spacer inbetween! | |
[* black] After all 4 (or 5) screws are removed, the black cover can be taken off (comes in two pieces) sideways |