E-bike Disassembly of frame for painting (model: HNF UD1) 단계 #49 기록

#49단계의 변경 사항

편집자 Bango Bejla- 2021년 7월 21일

편집 승인됨 완료자 Bango Bejla

	[* icon_reminder] The NuVinci gear shifter is on the right side.
	[* icon_reminder] The cables are tied together with the supernova lamp's thin cable (in comparison to Intuvias thicker cable) .
	[* icon_reminder] These cables go down on the left side of the frame. Then cross under the black part below the battery and exit on the right side (only the two Nuvinci cables from here). Then it goes down to the inner part of the frame's back triangle and has three plastic holders.
+	[* black] Remove the 3x screws, keeping the cable holders in place, with a 3mm hex key
+	[* icon_note] The frame is upside down for easier work conditions on the image