#6단계의 변경 사항
편집자 Bango Bejla-
편집 승인됨 완료자 Bango Bejla
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] Remove Belt guide | |
| [* black] With the help of a Philips 1 screwdriver remove the tiny screw holding the plastic guide in place | |
| [* black] After the screw is removed the plastic can be slid off to the side | |
| - | [* black] After loosening the back wheel the slide the belt and chain ring off |
| + | [* black] Loosening the back wheel bolts with the 15mm wrench on both sides of the rear axel and move the rear wheel out vertically for a few centimeters |
| + | [* icon_note] Thus no tension is on the belt |
| + | [* black] slide the belt and chain ring off |