#3단계의 변경 사항
편집자 Benjamin Doron-
편집 승인됨 완료자 Benjamin Doron
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Disconnect the keyboard flex cable by pushing each side of the plastic tab to release the connector from the board. |
|---|---|
| + | [* black] Disconnect the keyboard flex cable by pushing each side of the locking tab to release the connector from the board. |
| + | [* icon_note] This is a plunger-style ZIF (zero-insertion force) connector for a FFC (flexible fat cable). More information can be found [link|https://www.te.com/usa-en/products/connectors/pcb-connectors/wire-to-board-connectors/ffc-fpc-ribbon-connectors/fpc-connectors/intro-to-fine-pitch-fpc-connectors.html#chapter-3-dl|here]. |
| [* black] Release the keyboard backlight connector from the board by levering up the tab with a finger. | |
| - | [* |
| + | [* icon_note] This is the common ZIF connector. More information can be found [guide|25629|here|stepid=64969]. |
| [* black] Release the touchpad connector. |