물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Kristen Gismondi-

편집 승인됨 완료자 Kristen Gismondi

이전
이후
변경 사항 없음

단계 라인

-[* black] Open the bell by removing the top part. Try a twisting motion first but if that does not work, pry off the top using a flathead screwdriver.
-[* icon_note] Move around the edge of the bell as you pry upwards, if your bell top does not twist off.
-[* icon_caution] If you need to pry off the top, you will need to glue or solder the top back on at the end.
+[* black] Twist the top cover to remove it from the bell.
+[* black] If twisting does not work, pry around the edges of the top cover using a metal spudger to remove it.
+[* icon_reminder] If you need to pry off the top, you will need to glue or solder the top back on at the end.