주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Install the new screen by reattaching it to the logic board. Reinsert the ribbon into the cable lock and using alock. Use the spudger to push down the thin black clipbar up (circled in Picture 1).
[* black] Gently place the screen onagainst the logic board so that all ofit is aligned with the clips are in the proper location. Attach the new screen to the logic board by usingclips. Use a spudger to clip theengage all four clips holding the screen(circled in Picture 3).
[* black] Install the new screen by reattaching it to the logic board. Reinsert the ribbon into the cable lock and using alock. Use the spudger to push down the thin black clipbar up (circled in Picture 1).
[* black] Gently place the screen onagainst the logic board so that all ofit is aligned with the clips are in the proper location. Attach the new screen to the logic board by usingclips. Use a spudger to clip theengage all four clips holding the screen(circled in Picture 3).

이미지 1

이전 버전

새로운 버전

이미지 3

이전 이미지가 없습니다

추가