Skip to main content

#7 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] ReplaceInstall the new screen by reattaching it to the logic board by insertingboard. Reinsert the ribbon into the cable lock and using a spudger to push down the black clip.
[* black] ReplaceInstall the new screen by reattaching it to the logic board by insertingboard. Reinsert the ribbon into the cable lock and using a spudger to push down the black clip.
[* black] Gently place the screen on the logic board so that all of the clips are in the proper location. Attach the new screen to the logic board by using a spudger to clip the four clips holding the screen.