Skip to main content

#9 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] The small,Position the small black piece that fell out in step two needs positioned in the phone. It will be attached atStep 2 against the headphone jack on the side of the phonephone (circled in Picture 2).
[* black] The small,Position the small black piece that fell out in step two needs positioned in the phone. It will be attached atStep 2 against the headphone jack on the side of the phonephone (circled in Picture 2).
[* icon_note] This piece is very loose and will not snap into place. It must be set into place until the back cover is reattached.
[* black] Replace the inner cover on the phone.
[* black] Secure the inner cover by screwing in all four T6 screws with a T6 Torx Screwdriver.

이미지 2

이전 버전

새로운 버전