메인 콘텐츠로 스킵하기

이 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] After removing battery cover and battery, you now need to removeRemove the inner back cover of the phone.
[* red] To do this unscrew
by unscrewing all four T6 screws shown(circled in the picture.
[*
picture) with a T6 Torx Screwdriver.
[*
black] Once this is done gently removePull the inner back cover of the phone by pulling first from the bottom towards you,you and then from the top upwards.
[*

[*
icon_note] ItThe inner back cover can be very difficult to removeremove. You may need to use a Plastic Opening Tool. Near the back cover. An Ipod openingtop of the phone, insert the plastic tool may be useful herebetween the cover and the phone. Gently pry the cover off.
[* black] After removing battery cover and battery, you now need to removeRemove the inner back cover of the phone.
[* red] To do this unscrew
by unscrewing all four T6 screws shown(circled in the picture.
[*
picture) with a T6 Torx Screwdriver.
[*
black] Once this is done gently removePull the inner back cover of the phone by pulling first from the bottom towards you,you and then from the top upwards.
[*

[*
icon_note] ItThe inner back cover can be very difficult to removeremove. You may need to use a Plastic Opening Tool. Near the back cover. An Ipod openingtop of the phone, insert the plastic tool may be useful herebetween the cover and the phone. Gently pry the cover off.