Skip to main content

#4 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* redblack] Remove the inner cover by unscrewing all four T6 screws (circled in the picture) with a T6 Torx Screwdriver.
[* black] Once this is done, carefully liftLift the inner cover off of the phone. (a small side
[* icon_note] A small, black
piece (pictured) will fall away as well.)
[* icon_note]
out when you remove the cover. When reassembling,you reassemble your phone, attach this piece will go whereby the headphone opening isjack.
[* redblack] Remove the inner cover by unscrewing all four T6 screws (circled in the picture) with a T6 Torx Screwdriver.
[* black] Once this is done, carefully liftLift the inner cover off of the phone. (a small side
[* icon_note] A small, black
piece (pictured) will fall away as well.)
[* icon_note]
out when you remove the cover. When reassembling,you reassemble your phone, attach this piece will go whereby the headphone opening isjack.