Skip to main content

#6 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Detach the screen from the logic board by using a metal spudger to unclip the four clips holding the screenscreen (circled in Picture 1). Gently pull the screen away from the logic board so that none of the clips are engaged.
[* black] Detach the screen from the logic board by using a metal spudger to unclip the four clips holding the screenscreen (circled in Picture 1). Gently pull the screen away from the logic board so that none of the clips are engaged.
[* icon_note] The clips may weaken and break after unclipping them.
[* black] Remove the screen completely from the logic board by using a spudger to push back and up on the ribbon cable lock to release it.

이미지 1

이전 버전

새로운 버전