Skip to main content

#6 단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] The clips disengaged in the next step may weaken and break after unclipping them.
[* black] Detach the screen from the logic board by using a spudger to unclip the four clips holding the screen (circled in Picture 1). Gently pull the screen away from the logic board so that none of the clips are engaged.
[* icon_note] The clips may weaken and break after unclipping them.
[* black] Remove the screen completely from the logic board by using a spudger to push back and up on the ribbon cable lock to release it.

이미지 1

이전 버전

새로운 버전