메인 콘텐츠로 스킵하기

#6 단계의 변경 사항

Alex Campbell- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Detach the screen from the logic board by using a metal spudger to unclip the four clips holding the screen. Gently pull the screen away from the logic board so that none of the clips are engaged.
[* icon_note] The clips may weaken and break after unclipping them.
[* black] Remove the screen completely from the logic board by using a metal spudger to push back and up on the ribbon cable lock to release it.
[* black] Install the new screen by following these steps in reverse order.