주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#6단계의 변경 사항

Joe Frazier- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] The clips disengaged in the next bullet may weaken and break after unclipping them.
[* black] Detach the display screen from the logic board by using a spudger to unclip the four clips holding the display screen (circled in Picture 1). Gently pull the display screen away from the logic board so that none of the clips are engaged.
[* black] The display screen is attached to the logic board by a metal ribbon. Remove the display screen by disengaging the ribbon lock. Use a spudger to push the thin black bar down (circled in Picture 2). Gently pull the display screen and ribbon out of the logic board.
[* black] Detach the display screen from the logic board by using a spudger to unclip the four clips holding the display screen (circled in Picture 1). Gently pull the display screen away from the logic board so that none of the clips are engaged.
[* black] The display screen is attached to the logic board by a metal ribbon. Remove the display screen by disengaging the ribbon lock. Use a spudger to push the thin black bar down (circled in Picture 2). Gently pull the display screen and ribbon out of the logic board.