물건을 수리하세요 커뮤니티 상점

#3단계의 변경 사항

편집자 Richard-

편집 승인됨 완료자 Richard

이전
이후
변경 사항 없음

단계 라인

[* black] Insert your new propellers into the hole closer to centre of the motor.
[* icon_note] This also applies for the second propeller on the same motor. Refer to the second image.
[* icon_reminder] You may replace the screw if needed as well, if the previous screw is damaged.
-[* icon_caution] Make sure you know which propeller goes where, this is important as a wrong placement can mess up your drone's flight.
+[* icon_note] Make sure you know which propeller goes where. This is important as a wrong placement can cause unstable flight.