#2단계의 변경 사항
편집자 Kristen Gismondi-
편집 승인됨 완료자 Kristen Gismondi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Unscrew the screws around the back plate with a T5 Torx Screwdriver. |
|---|---|
| - | [* red] Six black 6.9 mm Torx screws |
| - | [* black] Unscrew the screw next to the antennae on the back plate. |
| - | [* orange] One 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver. |
| + | [* red] Remove the six 6.9 mm screws around the back plate with a T5 Torx screwdriver. |
| + | [* orange] Remove the single 9.8 mm screw next to the antennae on the back plate using a Phillips #00 screwdriver. |