물건을 수리하세요 커뮤니티 상점

#4단계의 변경 사항

편집자 Sarah Westberg-

편집 승인됨 완료자 Sarah Westberg

이전
이후
변경 사항 없음

단계 라인

-[* icon_caution] Before removing the mother board, ensure that you do not wipe any thermal paste off of the mother board. This will cause the drone to over heat.
-[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board.
+[* icon_caution] When removing the motherboard, don't wipe any thermal paste off of it. This will cause the drone to overheat.
+[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.