물건을 수리하세요 커뮤니티 상점

#4단계의 변경 사항

편집자 iRobot-

편집 승인됨 완료자 iRobot

이전
이후
변경 사항 없음

단계 라인

[* icon_caution] When removing the motherboard, don't wipe any thermal paste off of it. This will cause the drone to overheat.
-[* red] Using the ESD Safe Blunt NoseTweezers, carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.
+[* red] Using the ESD Safe Blunt Nose[product|IF145-020|Tweezers], carefully remove the glue that holds the cable connectors to the main board, ensuring that you do not scratch the main board. Detach the connectors.