#5단계의 변경 사항
편집자 Logan Wake-
편집 승인됨 완료자 Logan Wake
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* |
|---|---|
| + | [* red] Disconnect the cables and antennas from the main board by prying them up using the ESD Safe Tweezers Blunt Nose tool. |
| [* black] Using the Tri-point Y000 Screwdriver, remove the remaining two 5mm Phillips #J000 screws that are holding the mother board down. | |
| [* black] Remove the mother board from the DJI Mavic Mini |