물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Avionne Traylor-

편집 승인됨 완료자 Avionne Traylor

이전
이후
변경 사항 없음

단계 라인

-[* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1).
-[* black] Flip the optical drive assembly upside down
-[* red] Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.
-[* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).
+[* black] At this point, your optical drive assembly should be separated from your GameCube.
+[* black] Flip the optical drive assembly upside down.
+[* red] Remove the six Phillips #1 screws with a Phillips screwdriver.
+[* black] Gently lift and remove the metal plate.
[* icon_caution] ***Be careful*** not to disturb the brown ribbon cable (highlighted in orange).