물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Rowan White-

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항 없음

단계 라인

-[* black] At this point, your optical drive assembly should be separate from your GameCube and look like this.
-[* black] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
-[* yellow] Remove the metal plate, being careful not to disturb the brown ribbon cable.
+[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
+[* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown.
+[* yellow] Remove the metal plate. Do not to disturb the brown ribbon cable.