#1단계의 변경 사항
편집자 Rowan White-
편집 거부됨 완료자 Andrew Optimus Goldheart
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1). | |
| - | [* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown. |
| - | [* yellow] Remove the metal plate. Do not to disturb the brown ribbon cable. |
| + | [* red] Flip the optical drive assembly over and remove six (6) Phillips #1 screws as shown. |
| + | [* yellow] Remove the metal plate. Do not to disturb the brown ribbon cable (outlined in yellow). |