물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Lauren-

편집 승인됨 완료자 Lauren

이전
이후
변경 사항 없음

단계 라인

[* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1).
-[* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown.
-[* yellow] After the screws are removed, gently lift and remove the metal plate. Be careful not to disturb the brown ribbon cable.
+[* black] Flip the optical drive assembly over
+[* red] Remove the 6 Phillips #1 screws as shown.
+[* yellow] Once the screws are removed, gently lift and remove the metal plate.
+[* icon_caution] Be careful not to disturb the brown ribbon cable.