| - | [* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1). |
|---|
| - | [* black] Flip the optical drive assembly over |
|---|
| - | [* red] Remove the 6 Phillips #1 screws as shown. |
|---|
| - | [* yellow] Once the screws are removed, gently lift and remove the metal plate. |
|---|
| - | [* icon_caution] Be careful not to disturb the brown ribbon cable. |
|---|
| + | [* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1). |
|---|
| + | [* black] Flip the optical drive assembly upside down |
|---|
| + | [* red] Shown in picture 2, remove the 6 Phillips #1 screws. |
|---|
| + | [* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3). |
|---|
| + | [* icon_caution] Be careful not to disturb the brown ribbon cable (highlighted in the yellow). |
|---|