#1단계의 변경 사항
단계 라인
| [* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1). | |
| [* black] Flip the optical drive assembly upside down | |
| - | [* red] Shown in picture 2, remove the 6 Phillips #1 screws. |
| + | [* red] Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver. |
| [* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3). | |
| [* icon_caution] Be careful not to disturb the brown ribbon cable (highlighted in the yellow). |