주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Robert Wagner- 에 의해 수정

편집 승인됨 완료자 Robert Wagner

이전
이후
변경 사항이 없습니다

단계 라인

[* black] At this point, your optical drive assembly should be separated from your GameCube (picture 1).
[* black] Flip the optical drive assembly upside down
[* red] Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.
[* black] Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).
-[* icon_caution] Be careful not to disturb the brown ribbon cable (highlighted in the yellow).
+[* yellow] ***Be careful*** not to disturb the brown ribbon cable (highlighted in the yellow).