주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* yellow] Remove the blue wire.
-[* orange] Use a #1 Phillips Screwdriver to remove the four (4) screws connecting the circuit board to the optical drive assembly.
+[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly.
[* icon_note] The fourth screw is located behind the screwdriver in the third picture