#2단계의 변경 사항
편집자 Robert Wagner-
편집 승인됨 완료자 Robert Wagner
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* yellow] Remove the blue wire. |
|---|---|
| + | [* yellow] Remove the blue wire (as shown in yellow outline). |
| [* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly. | |
| - | [* icon_note] The fourth screw is located behind the screwdriver in the third picture |
| + | [* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles). |