물건을 수리하세요 커뮤니티 상점

#2단계의 변경 사항

편집자 Lauren-

편집 승인됨 완료자 Lauren

이전
이후
변경 사항 없음

단계 라인

[* yellow] Remove the blue wire (as shown in yellow outline).
-[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly.
+[* orange] Remove the 4 Phillips #1 screws connecting the circuit board to the optical drive assembly (shown in the third picture).
[* icon_note] The fourth screw is located behind the screwdriver in the third picture (highlighted in orange circles).