| - | [* icon_caution] Gently lift the metal plate off of the drive assembly. Be careful not to sever the two wires still attached to the two halves of the drive assembly. |
|---|
| - | [* black] Next, flip and rotate the drive assembly as shown in the third picture. |
|---|
| + | [* black] Gently lift the metal plate off of the drive assembly. |
|---|
| + | [* icon_caution] Be careful not to sever the red wire or ribbon cable still attached to the two halves of the drive assembly. |
|---|
| + | [* black] Then flip the two halves of the drive assembly upside down as shown in the third picture. |
|---|