#6단계의 변경 사항
편집자 Austin Blakely-
편집 승인됨 완료자 Austin Blakely
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* yellow] Use a flathead screwdriver to release the two clips located on the back half of the drive assembly. | |
| [* icon_note] The final clip doesn't need to be released; the top half of the drive assembly will slide away from the lower half. | |
| [* black] Finish removing the top half of the drive assembly from the base. | |
| - | [* icon_caution] Be careful not to |
| + | [* icon_caution] Be careful not to detach the red wire or the white ribbon cable still attached. |