주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

편집자 Kristen Gismondi-

편집 승인됨 완료자 Kristen Gismondi

이전
이후
변경 사항 없음

단계 라인

-[* red] Remove the seven 7mm screws from the backplate by using a Phillips Head #0 screwdriver.
-[* orange] Loosen the two back corner screws by using a Phillips Head #0 screwdriver.
-[* icon_note] The two back screws are not removable. A clicking sounds indicates that the screw is fully loosened.
+[* red] Remove the seven 7 mm screws from the bottom using a Phillips #0 screwdriver.
+[* orange] Loosen the two captive back corner screws using a Phillips #0 screwdriver.
+[* icon_note] The two corner screws are not removable. A clicking sounds indicates that the screw is fully loosened.