#7단계의 변경 사항
편집자 Sarah Westberg-
편집 승인됨 완료자 Sarah Westberg
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Place the dust cover sliding it through the top and proceed to install the stem. (Check how much space is there in between the top of the steerer tube and the top of your stem, your steerer tube should lay just a few millimeters below allowing clamping and compression, If not, add a spacer on top of the dust cover under the stem. |
|---|---|
| + | [* black] Slide the dust cover on and install the stem. |
| + | [* icon_note] Check the amount of space between the top of the steerer tube and the top of your stem. Your steerer tube should lay just a few millimeters below, and allow for clamping and compression. If it doesn't, add a spacer on top of the dust cover and under the stem. |