주요 콘텐츠로 건너뛰기

#12단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* icon_reminder] During reassembly, make surereassembly:
[* black] Keep loose cables clear of the board so they aren't caught under it.
[* black] Make sure
the antenna cables are inserted into their respective notches on the logic boardnotches, as highlighted in the second picture.
[* icon_reminder] During reassembly, make sure the speaker cable doesn't get stuck under the logic board.
[* icon_reminder] During reassembly, make surereassembly:
[* black] Keep loose cables clear of the board so they aren't caught under it.
[* black] Make sure
the antenna cables are inserted into their respective notches on the logic boardnotches, as highlighted in the second picture.
[* icon_reminder] During reassembly, make sure the speaker cable doesn't get stuck under the logic board.