주요 콘텐츠로 건너뛰기

#12단계의 변경 사항

kyle- 에 의해 수정

편집 거부됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Carefully remove the logic board assembly from the upper case, minding any cables that may get caught.
[* black] *The heat sink is also attached to the body on the end furthest from the logic board by one screw (not in pic) which must be removed or you will break the heat sink during removal.
[* icon_reminder] During reassembly, make sure the antenna cables are inserted into their respective notches on the logic board, as highlighted in the second picture.