메인 콘텐츠로 스킵하기

#2 단계의 변경 사항

Jessica Bradley- 에 의해 수정

편집 승인됨 에 의해 Jessica Bradley

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use one hand to grasp the phone and prop the grey casing up, and use your other hand to pry around the edges of the black plastic cover
[* [* icon_note] The black plastic cover is adhered with glue, so it will take a little force to free it from the back of the phone.
[* icon_note] The black plastic piece will still be attached to the outer grey casing with two wires that run to the vibration motor which is glued on to the outer grey casing. This is will be removed in the next step.
[* [* icon_note] The black plastic cover is adhered with glue, so it will take a little force to free it from the back of the phone.
[* icon_note] The black plastic piece will still be attached to the outer grey casing with two wires that run to the vibration motor which is glued on to the outer grey casing. This is will be removed in the next step.