Skip to main content

#2 단계의 변경 사항

Irena Tran- 에 의해 수정

편집 승인됨 에 의해 Irena Tran

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use one hand to grasp the phone and prop the grey casing up, and use your other hand to pry around the edges of the black plastic cover
[* icon_note] The black plastic coverpiece is adhered with glue, so it will take a little force to free it from the back of the phone.
[* icon_note] The black plastic piece will still be attached
glue to the outer grey casing with two wires that run to the vibration motor which is also glued on to the outer grey casing. This is will be removed in the next step.
[* icon_note] The black plastic coverpiece is adhered with glue, so it will take a little force to free it from the back of the phone.
[* icon_note] The black plastic piece will still be attached
glue to the outer grey casing with two wires that run to the vibration motor which is also glued on to the outer grey casing. This is will be removed in the next step.