메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Irena Tran- 에 의해 수정

편집 승인됨 에 의해 Irena Tran

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the tweezers to pull up and out to removeMake sure that the black cover.
[* icon_note] The
speaker, microphone, or vibrating motor may remainare attached to the black cover because they are adhesive.
[*
cover.
[*
black] If so, use the tweezersUse your finger to grasplift off the speaker, microphone, or vibrating motor and lightly pull down on it.
[* black] Make sure that
if it is detached fromremains attached to the blackback cover of the phone.
[* icon_note] The speaker, microphone,
and is laid invibrating motor are adhesive, so they may try to stick to the back cover of the phone as shownphone.
[* black] Use the tweezers to pull up and out to removeMake sure that the black cover.
[* icon_note] The
speaker, microphone, or vibrating motor may remainare attached to the black cover because they are adhesive.
[*
cover.
[*
black] If so, use the tweezersUse your finger to grasplift off the speaker, microphone, or vibrating motor and lightly pull down on it.
[* black] Make sure that
if it is detached fromremains attached to the blackback cover of the phone.
[* icon_note] The speaker, microphone,
and is laid invibrating motor are adhesive, so they may try to stick to the back cover of the phone as shownphone.

이미지 1

이전 이미지가 없습니다

추가