Skip to main content

#3 단계의 변경 사항

Irena Tran- 에 의해 수정

편집 승인됨 에 의해 Irena Tran

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the tweezers to detachpull up and out to remove the black cover.
[* icon_note] The
speaker, microphone, or vibrating motor from the back ofmay remain attached to the black cover
[* icon_note] The
because they are adhesive.
[* black] If so, use the tweezers to grasp the
speaker, microphone, andor vibrating motor are adhesive, so a little force will be needed to remove themand lightly pull down on it.
[* black] Make sure that it is detached from the black cover and is laid in the phone as shown.
[* black] Use the tweezers to detachpull up and out to remove the black cover.
[* icon_note] The
speaker, microphone, or vibrating motor from the back ofmay remain attached to the black cover
[* icon_note] The
because they are adhesive.
[* black] If so, use the tweezers to grasp the
speaker, microphone, andor vibrating motor are adhesive, so a little force will be needed to remove themand lightly pull down on it.
[* black] Make sure that it is detached from the black cover and is laid in the phone as shown.