물건을 수리하세요 커뮤니티 상점

#5단계의 변경 사항

편집자 Andrew-

편집 승인됨 완료자 Andrew

이전
이후
변경 사항 없음

단계 라인

[title] Remove the circuit board from the case
[* black] De-seolder the points highlighted (the charging / power supply pegs) and gently lift/pull out the electronics.
-[* black] The unit is held in by the charging pegs and also with double sided tape on the back of the battery, so may need some gently force/working at to lift (once the charging pegs have been de-soldered to free them).
+[* black] The unit is held in by the charging pegs and also with double sided tape on the back of the battery, so may need some gentle force/working at to lift (once the charging pegs have been de-soldered to free them).
[* black] N. B. the wires to the motors remain attached so do not fully tear away.