주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#7단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Logic board remains.
[*
icon_reminder] When reassembling your logic boarddevice, be sure the heat sink's rubber gasket is installed correctly. The nub on the gasket should mate with the hole cut into the logic board near the heat sink fins.
[* icon_note] The rubbertail of the gasket should attach tofit into the notch in the heat sink, it should not end ofup underneath the heat sink tab that will rest on the logic board.
[* black] Make sure the antenna cables are inserted into their respective notches on the logic board,
as seenhighlighted in the thirdlast picture.
[* black] Logic board remains.
[*
icon_reminder] When reassembling your logic boarddevice, be sure the heat sink's rubber gasket is installed correctly. The nub on the gasket should mate with the hole cut into the logic board near the heat sink fins.
[* icon_note] The rubbertail of the gasket should attach tofit into the notch in the heat sink, it should not end ofup underneath the heat sink tab that will rest on the logic board.
[* black] Make sure the antenna cables are inserted into their respective notches on the logic board,
as seenhighlighted in the thirdlast picture.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전