주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#7단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Logic board remains.
[* icon_reminder] When reassembling your logic board, be sure the rubber gasket is installed correctly. The nub on the gasket should mate with the hole cut into the logic board near the heat sink fins.
[* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the secondthird picture.
[* icon_note] The rubber gasket should attach to the end of the heat sink as seen in the secondthird picture.