#3 단계의 변경 사항

Michael Vovaris- 에 의해 수정

편집 거부됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following seven screws:
[* red] Six 1.6 mm PH000 Phillips screws securing the trackpad to the upper case.
[* red] Six 1.6 mm PH000 Phillips screws securing the trackpad to the upper case.
[* orange] One 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.
[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.