#1단계의 변경 사항
편집자 Nathan Luu-
편집 승인됨 완료자 Nathan Luu
- 이전
- 이후
- 변경 사항 없음
단계 라인
[* black] Simultaneously spread the retaining tabs on each side of the memory module slot. | |
+ | [* icon_note] Releasing the tabs will cause the memory module to "pop" up (the edge of the module opposite the slot rises up). |
+ | [* black] Pull the memory module away from the slot at the angle it rises from. |
+ | [* icon_reminder] Line up the notch on a memory module with the slot. This notch is designed to prevent incorrect insertion. |
+ | [* icon_reminder] If only one memory module is installed, it must be installed in the socket that is closer to the center of the computer. |