주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#20단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift the display up to a near-vertical position.
[* icon_note] At this point there is still a strip of adhesive along the bottom of the display, that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.
[* black] There are two strips left and right alongRemove as much of the bottom glue strip, where they reachadhesive as possible by grabbing it at the outer edges the last 20mm has no adhesive, effectively making right-angled lift-tabs, so you can remove these strips completely by carefullyedges, and then pulling them off from the outer endsor rolling toit towards the middle.