주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#4단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 완료자 Sam Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following screws from the front of the logic board:
[* red] Two 23.7 mm T10 screws.
[* orange] Four 7.4 mm T10 screws.
[* yellow] One 20.8 mm T25 spacer screw.
[* green] One captive T10 screw.
[* icon_note] This screw is beneath the logic board, but accessible via a hole throughin the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kitkit to reach it.
[* icon_note] This screw is beneath the logic board, but accessible via a hole throughin the logic board. You'll need a fixed screwdriver or the 60 mm extension from an iFixit driver kitkit to reach it.