주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Before installing the heat sink, see our [guide|744|thermal paste guide|new_window=true] for instructions on cleaning and preparing the thermal surfaces and applying a new layer of thermal compound onto the CPU and GPU dies.
+ [* black] For the VRAM chips surrounding the GPU, install thermal pads or a thick thermal paste such as K5-PRO, rather than regular thermal paste.
+[* icon_note] The above-mentioned "thermal surfaces" are as follows:
+ [* red] The CPU
+ [* orange] The GPU
+ [* yellow] The VRAM chips
+ [* green] The heat sink plates
+ [* icon_note] Note that the heat sink does not need new thermal paste. Clean it, but only apply thermal paste to the other surfaces.

이미지 1

이전 이미지 없음

추가