주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

tjk4- 에 의해 수정

편집 승인됨 완료자 Walter Galan

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Please Note: The GPU side has a gap between all memory chips and the cooler. Once you remove the cooler the thermal compound will break up leaving partial amounts on the cooler and memory contact points.
+[* black] I would highly recommend that you use the blade end of your apple tool to condense the stock thermal compound back to the center of the contact areas on all memory modules. This guarantees proper contact of the thermal compound, when you re-install the cooler.
+[* black] I have worked with the GTX775M & GTX780M models, both experiencing inadequate cooling when the GPU is pushed to the upper limits. Take the time to ensure all (8) memory contact points have a sufficient amount of contact with the OEM paste. Do not use Arctic Silver.

이미지 1

이전 이미지 없음

추가